BURY CC 9060 Music USER Manual - Manual (Page 9)

9
5. Connections on the electronics box
The additional components of the HFCK are connected to the electronics box. The following connec-
tions are provided:
Connection options:
1 Power supply / Mute
2 Ignition
3 Vehicle Interface Lead (ISO)
4 basePlate System 9 adapted for CC 9060
5 Phone-OUT (Jack 3,5 mono)
6 Microphone input
7 LINE-OUT (Jack 3,5mm stereo)
8 Monitor / Touch screen
9 Accessories / Remote control
10 iPod/iPhone Connection
Connection 1 - Power supply / Mute
Version 1:
This connection is not used with version 1. Refer to connection 3.
Version 2:
The power supply of the HFCK is established via a 4-core cable (scope of supply no. 9). Connect the
black (clamp 31 – minus), the red (clamp 30 – steady plus) and the blue cable (clamp 15 – ignition plus)
to the power supply of your radio (where required via the cigarette lighter or the fuse box). After con-
nection to the counterpart, the yellow cable provides for radio muting during a phone conversation.
Please connect the white Molex connector with connection 1.
If you connect additional adapter cables or accessories to connections 5 and 7 to play back music and
for voice feedback, then when you subsequently activate the HFCK, you will have to select Option 3
in the Settings -> Audio -> Installation menu.
SYS 9
PHONE OUT
MIC
LINE OUT
DISP
RC
iPOD / iPHONE