BURY CP 1000 CarPhone USER Manual - Manual (Page 12)

12
Installation of the system
6. Connections on the electronics box
The additional components of the BURY CP 1000 CarPhone are connected to the electronics box.
The following connections are provided:
Connection options:
1 Power supply
2 External loudspeaker
3 Microphone
4 BURY CP 1000 CarPhone
1 - Power supply
The power supply of the BURY CP 1000 CarPhone is established via
a 4-core cable. Connect the black (clamp 31 – minus), the red (clamp
30 – steady plus) and the blue cable (clamp 15 – ignition plus) to the
power supply of your radio (where required via the cigarette lighter or
the fuse box). After connection to the counterpart, the yellow cable
provides for radio muting during a phone conversation. Please connect
the white Molex connector with connection 1.
Note:
Do not connect your device to the power supply or switch X
it on until instructed to do so in the installation instruc-
tions.
Attention:
If you also connect the blue cable to clamp 30 (steady X
positive), the BURY CP 1000 CarPhone will be permanently
supplied with power. If the vehicle is not running for a long-
er period, this could lead to a discharge of the car battery.
If you deviate from the specified connection descriptions X
it may be the case that certain functions on the BURY CP
1000 CarPhone (e.g. the on-call duty) will not function cor-
rectly.
4
1
2
3