BURY CP 1000 CarPhone USER Manual - Manual (Page 26)

26
Operating guidelines
Short dial
The phone list for the FDN function can be reviewed and activated /
deactivated by using the PIN 2 code. The number of FDN contacts you
can store to the SIM memory depends on the SIM card (at least 9 and
up to 50 contacts).
You can then assign the numbers 0-9 to the defined phone numbers
and you can call the contact simply by pressing the corresponding
number.
Note:
If the FDN mode is activated, you can only send an SMS X
to a number that is stored in the FDN contacts.
To send text messages to the SIM contacts while the fixed X
dialling service is active, you need to add the text message
centre number to the fixed dialling list.
Short dialling
Short dialling enables you to make phone calls at the touch of a button
and to send short messages. There are eight numeric keys (keys 2 to
9), which can be assigned a short dialling number.
Tip:
Set the short dialling keys on the basis of your own prefer- X
ences. One preference might be, for instance, the younger
the person, the lower the value of the numeric key to which
the speed dial is allocated.
The BURY CP 1000 CarPhone has an integrated digital signal processor
(DSP). This serves the functions of voice recognition and voice synthe-
sis and is activated as standard. Together with the suppression of back-
ground noise and echoes, the DSP guarantees optimum conversational
sound quality. You can completely deactivate the DSP.
Number presentation
Using the Number presentation menu item, you are able to select as
to whether the BURY CP 1000 CarPhone sends the details of your own
number along during an outgoing telephone call or not. Here, you have
a choice of two options: Show number and Hide number. Your tel-
ephone number will then consistently either be hidden or sent.
GSM power off
In this menu you can adjust the GSM.
GSM power off
Number
presentation
DSP