BURY EasyTouch Pro - Manual (Page 20)

Operating guidelines
20
Settings
In this menu you can configure the HFCK with other submenus.
These are Switch phones, Automatic connection, Sleep
mode, Language, Multipoint, TTS, Key sound, Brightness,
Factory settings, Version info.
With the Switch phones function, you can change the priorities of
both connected telephones. Both mobile phones are disconnected
and are then connected again the other way round. This can take a
few seconds. Press the home button once to activate the BURY
EasyTouch Pro. Press and hold the home button to switch the
priority of the phones. Once the phones have been successfully
switched you will hear a beep.
Note:
This function is only available if the multipoint function X
has been activated.
Upon activation of the HFCK, the standard phone will be looked for
as the first phone if the automatic connection (Automatic
connection) is activated and in the phone list it will always be
listed first. In addition, this is always the first phone when the
multipoint function is activated. If the mobile phone also supports
music transfer via A2DP then this
Bluetooth profile can also be
linked to or separated from the hands-free mode.
It is therefore possible to play music from a phone and also to
accept calls with the HFCK. Music playback will be stopped for
incoming calls or if the HFCK is activated.