BURY EasyTouch Pro - Manual (Page 27)

27
Outgoing call
Briefly press down on the call button to activate the voicetag
function. The device says: Enter voicetag. Begin the call with
a voicetag. If the number dialled is busy, you can begin to redial. To
do so, hold down the call button (for two seconds). The device says:
Redial.
If you announce a non-saved voicetag then the device says:
Voicetag is not available. BURY EasyTouch Pro returns to standby
mode.
Briefly press down on the end call button to end the voicetag
function, the active call or the redialling.
If you make a call and briefly press down on the call button, the
private mode is then started. The call is then forwarded to the
mobile phone.
Incoming call
The backlight to the sensor keys is activated. In addition to this,
a ring tone sounds which alerts to an incoming call. If the mobile
phone transfers its own ring tone to the hands-free car kit (depending
on the mobile phone), then this will sound. If the caller has hidden
their number, then the device says: Unknown caller.
Briefly press down on the end call button to refuse the call.
The device returns to standby mode.
Briefly press down on the call button to accept the incoming call.