Echo CS-330T Serial C04212001001 - C04212999999 - Manual (Page 19)

CS-330T OPERATION
© 08/2013 ECHO Inc.
X7503245101 19
Proper lubrication of the chain while in operation reduces
friction between the chain and the guide bar to a minimum
and assures a longer service life.
• Use bar and chain oil of high quality for this purpose.
• Do not use used or reclaimed oil to avoid various oiler
problems.
• Use ECHO bar and chain oil.
• When ECHO bar and chain oil is not available: Use motor
oil, etc.
• Use bar and chain oil of the following grades:
• SAE No. 30....in summer
• SAE No. 10....in winter or when cutting resinous trees.
• When refueling, also refill chain oil.
Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects
away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts
have come to a complete stop before removing obstructions, clearing debris, or servicing unit.
Engine exhaust IS HOT, and contains Carbon Monoxide (CO), a poison gas. Breathing CO can cause
unconsciousness, serious injury, or death. Exhaust can cause serious burns. ALWAYS position unit
so that exhaust is directed away from your face and body.
Operation of this equipment may create sparks that can start fires. This unit is equipped with a spark
arrestor to prevent discharge of hot particles from the engine. Metal cutters can also create sparks if
the cutter strikes rocks, metal, or other hard objects. Contact local fire authorities for laws or
regulations regarding fire prevention requirements.
Starting Cold Engine
Make sure the bar and chain are free from any obstruction
when starting the chain saw.
1. Move chain brake lever (B) fully forward to lock chain brake
before starting.
Fuel tank cap Oil tank cap
For more information
scan this QR code.
A