Echo CH500H Owners Manual v.3 - Manual (Page 7)

5" and 8" Skid Steer Chipper
3
SAFETY
1
2 6
3
PN 12173
4
7
1.6 SAFETY DECALS
See Section 1.7 for decal locations. Familiarize yourself with all of the safety and operating decals on the machine
and the associated hazards. See the engine owner’s manual or contact the engine manufacturer for engine safety
instructions and decals. Make certain that all safety and operational decals on this machine are kept clean and in good
condition. Decals that need replacement must be applied to their original locations.
PN 12169
PN 12250
PN 12172
PN 12174
PN 14942-00
KEEP HANDS AND FEET OUT OF INLET
AND DISCHARGE OPENINGS WHILE
MACHINE IS OPERATING TO AVOID SE-
RIOUS PERSONAL INJURY. STOP AND
ALLOW MACHINE TO COME TO A COM-
PLETE STOP BEFORE CLEARING OB-
STRUCTIONS.
READ AND UNDERSTAND THIS
OWNER/OPERATORS MANUAL.
BE COMPLETELY FAMILIAR WITH
THE CONTROLS AND THE PROP-
ER USE OF THIS EQUIPMENT
OBTAIN AND WEAR SAFETY
GLASSES AND USE HEARING
PROTECTION AT ALL TIMES
WHEN OPERATING THIS MA-
CHINE.
BEFORE INSPECTING OR SER-
VICING ANY PART OF THIS MA-
CHINE, SHUT OFF POWER SOURCE, REMOVE THE KEY,
DISCONNECT SPARK PLUG WIRE FROM SPARK PLUG
AND MAKE SURE ALL MOVING PARTS HAVE COME TO A
COMPLETE STOP.
DO NOT OPERATE THIS
EQUIPMENT IN THE VI-
CINITY OF BYSTAND-
ERS. DO NOT ALLOW
CHILDREN TO OPER-
ATE THIS EQUIPMENT.
ALWAYS STAND CLEAR
OF DISCHARGE AREA WHEN OPERATING THIS MACHINE.
KEEP FACE AND BODY AWAY FROM DISCHARGE AREAS.
DO NOT OPERATE MACHINE WITH-
OUT SHIELDS IN PLACE. FAILURE
TO DO SO MAY CAUSE SERIOUS
INJURY OR DEATH.
CHECK BLADE BOLTS FOR
PROPER TORQUE AFTER EV-
ERY 8 HOURS OF OPERATION.
CHECK BLADES AND ROTATE
OR RESHARPEN DAILY OR AS
REQUIRED TO KEEP BLADES
SHARP. REFER TO OWNERS MANUAL FOR INSTRUC-
TIONS. FAILURE TO DO SO MAY CAUSE POOR PERFOR-
MANCE, DAMAGE OR PERSONAL INJURY AND WILL VOID
THE MACHINE WARRANTY.
PN 12175
KEEP HANDS AND FEET
OUT OF INLET AND DIS-
CHARGE OPENINGS
WHILE MACHINE IS OP-
ERATING TO AVOID SE-
RIOUS PERSONAL IN-
JURY. STOP AND ALLOW
MACHINE TO COME TO A
COMPLETE STOP BEFORE CLEARING OBSTRUCTIONS.
5
READ AND UNDERSTAND YOU OWNERS MANUAL BEFORE
OPERATING. IF OWNERS MANUAL WAS NOT INCLUDED OR
YOU HAVE ANY QUESTIONS, PLEASE CALL 800.247.7335 OR
701.282.5520 (U.S.A.)
8 PN 18287-00