Bissell BS-9400F - Manual (Page 2)

Prepared by Monique Lania 2 Call Servicing Guide ProHeat 2X 9400F.doc
Consumer states unit will not spray to the floor and no spray from the
upholstery tool
Solution 1:
Solution 1:
The Red float door inside lid of 2-in-1 Tank may have closed as a result of the Tank being full of dirty
water and needs to be emptied and refilled with clean water, or bumping an object or moving machine
back and forth too quickly. When this happens the red Water Level Indicator will rise and create a shut
off mechanism over the hole where red Lint Filter Basket sits to prevent water getting into motor area.
If this occurs, remove the 2-in1 Tank from the machine.
Lift grey latch at back of tank to remove Tank Lid
Ensure that the red Water Indicator inside the Tank Lid is sitting away from the red Lint Filter Basket
inside and remove any debris from the red lint filter basket (it can be removed and rinsed in hot tap
water if necessary). Is there spray now?
No, proceed to Solution 2 Yes, problem solved