Bissell BS-9400F - Manual (Page 6)

Prepared by Monique Lania 6 Call Servicing Guide ProHeat 2X 9400F.doc
Locate the Small Brush Belt, has it come off the Brush end?
Yes, refit by reversing the steps above. If the
small Brush Belt is damaged or broken advise
customer to call Bissell Free Call 1800 number
again and press Option 4 for spare parts and
order replacement small Brush Belt No, is Brush Assembly damaged, or full of debris?
Yes, remove debris and hair with soft cloth and scissors or order replacement
brush assembly if appropriate. Brush Rolls can be removed by pulling them
off the metal rods and replaced by placing them back onto the rods, making
sure one washer is on each of the rollers prior to sliding onto the rod. Be sure
to let the rod slide through the bushing to ensure proper fit. Replace end cap
by reversing the steps above, Does is spray now?
Yes, problem solved
No, replace end cap by
reversing the steps above
and proceed to Solution 4
No, proceed to Solution 5