Connector lay-out (4-channel version), Status led indicators, Before you start 2.1 – 2N VoiceBlue Next v3.0 User Manual
Page 15
Advertising
Before You Start
2.1
15
Connector Lay-Out (4-Channel Version)
The following connectors are mounted on the 2N
®
VoiceBlue Next bottom:
10/100BaseT Ethernet connector with PoE support
RESET button – press for a short time to restart the GSM gateway and for a
long time to restart the GSM gateway and download the factory settings.
Antenna connector for all GSM/UMTS channels
SIM holder
Find a power supply connector (DC Jack 2.1mm) and type plates at the rear.
Status LED Indicators
The 2N
®
VoiceBlue Next states are indicated by LEDs on the front and system
connector sides. For the LED types see the table below.
Advertising