2N VoiceBlue Next v3.0 - Manual (Page 61)

Web Configuration Interface 3.4
61
Others
 Time to keep CLIP in table – set the time for which records are to be kept in
the AutoCLIP routing table.
 Add record only for unconnected call – unconnected outdoing calls are stored
in the AutoCLIP table only.
 Delete record for connected answer – if the CallBack is successful, the
corresponding AutoCLIP record will be deleted.
 Skip DTMF for numbers not in CLIP Routing table – enable this function to
define that only the incoming calls whose CLIPs are stored in the CLIP Routing
table will be able to use DTMF dial-in.
 Skip list of called numbers after failed call to wanted number - enable this
function to define that the incoming call will not be forwarded to the
number(s) included in the List of called numbers in case the call is rejected
after the preceding DMTF dial-in.
 Auto end to CallBack request – any incoming call whose CLIP matches the
CallBack setting will be rejected and all the other incoming calls will be
ignored. In either case, the CallBack function will be invoked after the
incoming call ends.
List of called numbers
List of dialled numbers if DTMF dial-in was not used.
Prefixes
The window helps you adapt the gateway to calling to variable GSM networks. You
can set the prefix-based call routing rules here and identify up to eight different
groups for routing.
Prefix list 1-8
Eight prefix groups to be assigned in the LCR table.
Basic settings
 GSM network ID – name the prefix list for convenience.
 Default count of digits – the default length of the number to be dialled into
GSM/UMTS when routing via the selected prefix list. Use this parameter if the
Digits count parameter is not included in the Accepted prefixes table.
Table of replaced prefixes
This table helps you change the prefix of the number received (from 00 to +,
e.g.). You can just add or remove a prefix using this table. This change is performed
before the prefix table search is initiated. Keep the „“/ „“ record at least in the table
for a proper function.
Table of accepted prefixes
A list of prefixes of called destinations to which the selected prefix list applies.