2N VoiceBlue Next v3.0 - Manual (Page 58)

Web Configuration Interface 3.4
58
Note
 Check the GSM/UMTS searching priorities on the SIM card using your
mobile phone before enabling roaming.
Caution
 Calls via a roaming network may increase you telephone bill!
 CLIR – fill in this parameter to define whether or not the called subscriber
should be displayed the calling SIM card telephone number. It is
recommended that the telephone number of the SIM card inserted in the GSM
module should not be displayed to the called subscriber to avoid problems
with CallBack from GSM.
Caution
 The Temporary CLIP and Temporary CLIR enable services must be
supported by the GSM/UMTS provider. If not, not, the provider‟s network
may reject the call!
 Maximum count of called minutes - set the maximum count of minutes to be
used via the SIM card per month.
 Count of SMS messages - set the maximum count of SMS messages to be
sent via the SIM card per month.
 Day to restore call limit and delete statistics – set the day in a month on
which the statistics of the Maximum count of called minutes a Count of
SMS messages parameters should be deleted.
 First count – set the length of the first pulse after which the pulse counting
will be changed as set in the Next count parameter.
 Next count – set the length of one pulse in seconds after the time as defined
in the First count parameter elapses.
Note
 A correct setting of the First count and Next count parameters
guarantees a correct counting of remaining minutes on SIM cards. These
parameters help limit outgoing calls according to free minutes. The CDR
includes real data.
 Day limit of called minutes – set the maximum count of minutes to be called
via the SIM card per day.
Time limits
Define the SIM card use time limits for the GSM group.
Call tariffs – use this function to assign up to four independent free minute
counters to each GSM module (SIM card) group:
Tariff 1 = free minutes for calls to own GSM/UMTS network;