ADS-TEC OPC5115 - Manual (Page 16)

Industrial PCs OPC5115
16
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
6.2 S OFTWARE KEYBOARD
If the factory settings include the operating system, then the software keyboard will be
installed as well. If the factory settings do not include the operating system, then the
software keyboard still has to be installed. The software keyboard can be used to enter
data using the touch screen as you would with an external keyboard.
Operating the software keyboard version 3.11 and higher:
Displaying and closing the software keyboard to enter characters via the
touch screen as well as switching between the numeric and alphabetic
keyboard using the ABC / 123 button
Switches the numeric block display (only displayed with numeric block)
Display switch (alphabetic  keyboard  to numeric block  F1-F12)
Increases the display size of the software keyboard
Decreases the display size of the software keyboard
Note:
If functions are to be invoked, which require pressing two keys at the same time on a
standard keyboard (e.g. Alt + F4), then these keys are to be pressed one after the other
on the software keyboard and the special keys Shift, Alt and Ctrl always have to be
pressed first.
We can not guarantee that the software keyboard will function with all software due to
differences in software programming.
The most recent activated status is saved upon closing the software keyboard
(alphabetic/numeric block or F1  F12) and this status will be displayed again the next
time the software keyboard is invoked.