ADS-TEC OPC5115 - Manual (Page 25)

Industrial PCs OPC5115
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
25
9 S
OFTWARE
/
DRIVER INSTALLATION
The device is provided with a preinstalled Windows operating system if requested by the
customer. The drivers required for this are configured and the operating system is
activated by entering the licensing information. If you have to reinstall the operating
system, please proceed as follows. More recent operating systems such as Windows XP
recognize the network and graphics cards upon initial installation and therefore you only
have to install the drivers for the touch screen and the software keyboard.
Note:
If the hard drive has been formatted, then the operating system can be installed again
using the provided interfaces.
An external keyboard is required for installation.
9.1 I
NSTALLING THE OPERATING SYSTEM
If the device has no integrated drive, then the operating system can only be installed using
the USB interface.
Installation procedure:
USB:
In order to be able to boot the system from the USB interface, you have to
set the boot drive to USB in the BIOS.
Restart the device and insert a Windows CD.
Installing Windows and configuring the basic data.
The touch screen driver and the software keyboard should be installed for
devices with touch screen.
You can use a USB stick containing an image file to perform a complete install of Windows
CE.net or Windows XP Embedded. You can obtain the required image from ads-tec or the
ASSIX online portal.