AiM GPS05 Module - Manual (Page 20)

GPS05 Module
User manual
Release 1.01
4 1
4.4.4 – Troubleshooting
If the screen shows: "Bad Setting,
please Restart
": the beacon setting
procedure did not end correctly and
needs to be restarted. Press “ON/VIEW”
button and restart the procedure.
If the screen shows: "GPS LapTimer
Initializing
": simply wait a few seconds.
If the screen shows "GPS Tracks
Memory Full
": GPS Tracks Memory is
full; it is necessary to save the tracks and
erase the memory using GPS Manager
software.
In case the screen shows "GPS OFF":
the GPS is Off (CAN connection is
broken); wait for a few seconds and
everything will come back ok. If this
message is shown for more than 10
seconds it is suggested to check CAN
connection or to switch off/on the engine.
In case the screen shows "GPS FW
must be Upgraded
" it is necessary to
upgrade GPS firmware (correct versions
are from 35.14 onward).
www.aim-sportline.com 19