AiM TC Hub - Manual (Page 3)

TC Hub connected to MXL and EVO
User manual
Release 1.01
0
Chapter 1 – Characteristics, part number and installation
TC Hub is a thermocouples multiplier that can support up to four thermo couples (“K”
type only) and cascade connection of more TH Hub is possible. It communicates
through the CAN protocol increasing available channels without occupying any analog
channel of the logger and minimizing wiring overall. TC Hub can be connected to: MXL
Pista, MXL Pro05, Evo3 Pro, Evo3 Pista and EVO4 and is waterproof IP 65.
TC Hub can monitor any temperature like, exhaust gas of all cylinders, water and oil
temperature. It correctly support also infrared sensors that simulate thermocouples
working mode (“K” type only).
4
1.1 – Part number
TC Hub (with 150 cm CAN cable) part number is: X08UTCCTC
5
1.2 – Installation
To install TC Hub use the proper lateral holes and install it far from heat sources or from
electromagnetic interference sources. Pay attention not to let cables pass near to heat
sources.
6
1.3 – Connection with MXL and EVO
TC Hub can be connected as any CAN peripheral as shown here below.
Warning: connect TC Hub and MXL/EVO when both devices are OFF.
www.aim-sportline.com 2