AiM TC Hub - Manual (Page 7)

TC Hub connected to MXL and EVO
User manual
Release 1.01
When all parameters have been fixed and the field have been associated with the
respective channel the configuration is to be transmitted to the logger. Just press
“Transmit” button on Race Studio 2 top keyboard. When the configuration has been
transmitted a confirmation message appears.
In case PC-logger USB connection is not ok or one or more peripherals have not been
correctly recognised by the logger one of the following messages appears:
USB error:
unplug the USB cable from both the PC and the logger, re-plug it and retry to transmit
the configuration.
The expansion has not been recognised by the logger: check that the expansion ID
number is correct and retry transmitting the configuration to the logger.
www.aim-sportline.com 6