AiM TC Hub - Manual (Page 6)

TC Hub connected to MXL and EVO
User manual
Release 1.01
1 0
2.1 – Configurations of MXL and EVO displays
TC Hub channels can be shown on MXL display setting them in “System Configuration”
layer as shown here below.
TC Hub channels visualisation can be set like the visualisation of any other channel
(see MXL user manual for further information). In the example here below TC Hub
enabled channels to be shown are TC_1, TC_2 e TC_3. Each of them can be shown in
a field of the display.
In case, on the contrary, TC Hub is connected to an EVO, data visualisation is only
possible if the logger is connected to a Formula Steering Wheel display or to a
MyChron3 Dash and shown channels are set in the display configuration as shown
here below.
www.aim-sportline.com 5