AiM SportsAgenda - Manual (Page 25)

SportsAgenda
User manual
Release 1.03
www.aim-sportline.com/mytach
2 3
5.2 – Measures and laps bar (section 1)
Selecting “Measures graph” window (section 2) “Measures and laps” bar shown here
below appears. It is made up of two layers: “Measures” and “Laps”.
To switch from a visualization to another press the layer label.
3 2
5.2.1 – Measures in “Measures Graph” mode
“Measures” layer allows to show the punctual values of all sampled measures (selectable
on demand) in any point of the track.
Description of the horizontal sections
Enabling “Per lap colour” function (1)
all measures belonging to the same
lap have the same colour.
“Tests loaded” (2) shows all open tests
with lap times of each lap of each test.
In the example here on the left (3) test
named “r024 2008 – 11 MyTach_001”
is made of a lap whose lap time is
23’.14”.447 and test named “r001
2008-11 MyTach _006” is made of a
lap whose lap time is 00’.07”.008.
Note: “Tests loaded” panel shows only
the lap times of the laps selected in
“Test laps” bar (Section 4).
To close a test click the black cross.
Open tests are visualized in sequence
25