AiM SportsAgenda - Manual (Page 5)

SportsAgenda
User manual
Release 1.03
www.aim-sportline.com/mytach
0
Chapter 1 – How to install and configure the software
6
1.1 – Preliminary operation
Before installing the software unplug any AIM logger connected to the PC USB port and
close all running applications.
Some preliminary operations are to be performer before software installation.
The first one is to check Windows® “Driver signing” setting.
• follow this path: Start / settings / control panel / system;
• select “Hardware” layer (image below on the left);
• press “Driver signing” button;
• select “warn – prompt me each time to choose an action” (image below on the right)
• confirm pressing “OK” and close all applications.
The second operation is to be performed only in case no download from MyTach is
possible. It is related to the number of COM set by default.
For a correct download the COM port number must 24 or lower.
To modify COM port number:
Follow this path: start / settings / control panel / system / hardware / device manager /
ports(COM LPT) / AIM USB to UART BRIDGE / port settings / advanced.
Select from the drop down menu the “COM port number” in a range value from 1 to 24.
5