AiM SportsAgenda - Manual (Page 31)

SportsAgenda
User manual
Release 1.03
www.aim-sportline.com/mytach
2 4
5.4 – GPS Data (section 3)
GPS Data function allows to visualize GPS track.
To enable the layer it is necessary to click the left icon.
3 5
5.4.1 – How to set the graph visualization of GPS channels.
Before analyzing GPS data it is suggested to fix its visualization
settings clicking on the icon shown here on the right.
The window here below appears:
Colour channels unit (Field 1): contains the list of the shown channels and allows to
select the channels whose colour is to be set.
Fields 2, 3 and 4 (central) are in “Bands values” panel. It allows to actually select the data
visualization mode. First of all select the desired visualization: smooth (field 3 and 4
central) or smooth (field 2).
Bands (field 3).
This mode needs the setting of some parameters that allows to show data divided by
bands with no colour gradient.
The first operation to perform is choosing the number of bands – from 3 to 10 – to divide
the values range. A corresponding number of coloured boxes appears in “Bands colours”
panel (field 4 on the right).
Afterwards it is necessary to select one of the following options:
• Specify bands Min and Band width.
• Specify bands Min and Max value.
Once the kind of visualization to be set has been decided choose if showing values higher
than the max ones and lower than the min ones (field 4 central).
These options influence the graph layout because hiding these values the part of the
graphs involved in them are actually hidden.
Smooth (field 2).
Choosing this mode it is necessary to set Max and min values and data are shown with a
continuous gradient of colour.
31