AirLive BU-2015 - Manual (Page 29)

6. Configuration
AirLive BU-2015 User’s Manual 24
If you want to specify one IP address only, input the same IP address
in both field.
Click ‘New’ button to add IP address into accepted IP list.
Deny IP list Here lists all IP address that cannot build connections to this IP
camera. If you want to remove a set of IP address from the list, click
on the IP address and click ‘Remove’ button.
IP Address
(Accepted IP list) Input the starting and ending IP address of IP address you wish to
deny connections here. IP camera will deny connections established
from these IP address.
If you want to specify one IP address only, input the same IP address
in both field.
Click ‘New’ button to add IP address into deny IP list.
When you finish with above settings, click ‘Apply’ button to save changes.