AirLive BU-2015 - Manual (Page 30)

6. Configuration
AirLive BU-2015 User’s Manual 25
6.5 Video
1. Image Setting
You can adjust the image parameters in this page.
z
Brightness /Contrast /Saturation /Sharpness:
Control the image parameters. Click ‘ ­‘ to decrease value, or click ‘ + ‘ to increase
value. You can also input the value in the field directly.
z
Exposure Setting:
1. Manual: You can setup more details here including Exposure Value, Exposure Time
and Gain.
2. Exposure Value is from 0~255
3. Exposure Time range is about Auto, 1/15, 1/30, 1/50, 1/60, 1/100, 1/120, 1/250,
1/500, 1/1000, 1/2000, 1/4000, 1/10000.
4. Gain value is from 0~8
5. Auto: Camera will adjust the exposure automatically.
z
Mirror:
Check “Vertical” and “Horizontal” box to flip the image vertically or horizontally.
z
Power Line Frequency:
Select the frequency of power line of the place you’re using this IP camera. This will
help to reduce the flicker of certain lights in the image.
z
Condition(AWB):
Select the condition that you’ll be using this IP camera from dropdown menu.
Auto: IP camera will adjust its parameters automatically.
Indoor, B/W, Tungsten: IP camera will adjust its parameters by different environment.
z
IR cut:
An IR cut filter is built in this IP camera to reduce the effect of IR lights (which will
change the color of image and makes it looks different than what you see through your
eyes), and most of IR lights are coming from sunlight.
You can select the behavior or IR cut filter:
Auto: IR filter will act automatically. If you don't know wheatear you should use IR
filter or not, select this option.
Night mode (B/W): IR filter is always on.
Day mode (Color): IR filter is always off.