AirLive BU-2015 - Manual (Page 40)

6. Configuration
AirLive BU-2015 User’s Manual 35
‐ Sender Email Address: Input the sender’s email address that will
appear in the Email send by IP camera. This will help you to
identify the Email sent by this IP camera, and may help when you
have anti-spam software installed (you can set this Email address
to ‘White List’ in your anti-spam software)
‐ Receiver #1 Email Address: Input primary recipient’s Email
address. This field is required.
‐ Receiver #2 Email Address: Input backup recipient’s Email
address. This field is optional.
‐ Subject: Input Email title that will appear in the Email send by IP
camera. This will help you to identify the Email sent by this IP
camera.
‐ Authentication: Check this box when authentication is required by
the Email server you’re using. You also need to input Email
server’s username and password in corresponding field.
‐ Requires SSL Encryption: If your Email server required SSL
encryption, check this box. Please note that some Email server
uses different port number than standard port 25 when SSL
encryption is used.
‐ STARTTLS: If your Email server required STARTTLS encryption,
check this box. Please note that some Email server uses different
port number than standard port 25 when STARTTLS encryption is
used.
‐ Test SMTP: Click this button to test SMTP server settings above
immediately.
Samba Server Check this box to enable Samba server file upload.
‐ Samba Server Address: Input Samba server’s IP address or
hostname.
‐ Path: Input the path where you want to save file on Samba server,
like ‘upload/record’. If you want to save file on this user’s home
directory, you can leave this field blank.