AirLive CamPro HD - Manual (Page 42)

2. Main-console
AirLive CamPro HD User’s Manual
37
Clone Camera setting:
1. Select one camera and click “Copy”
button, or click mouse right button and
select “Copy” on pop-up menu.
2. Copy only camera’s configuration,
camera’s parameter or both of them.
3. Select a target camera and click
“Paste” button to update the settings
was copied.
4. (Or click mouse right button on target camera, and select “Paste” on pop-up
menu)
5. Click “Apply all” button will toggle update all cameras setting with the copied
setting.
z
OSD Configuration
System could show some information on the
sub-screen.
Checked the check box before the information
to enable displayed this one. The information will
display on the preview screen at left-upper corner.
Show Date:
Display system date.
Show Time: Display system time.
Show Camera Name:
Display this Camera name.
Show Frame per second:
Display the frame per second of this channel.
Show Bitrate:
Display the bit-rate per second of this channel.