AirLive CamPro HD - Manual (Page 67)

2. Main-console
AirLive CamPro HD User’s Manual 62
Add button:
Define a rectangle area on the image first, then click “Add” button to add
a new region.
Delete button:
Define a rectangle area on the image first, then click “Delete” button to
remove the region that was defined.
Sensitivity:
Set sensitivity level of motion detection. Level 5 means the highest motion
detection sensitivity. On the contrary, level 1 is the lowest level of sensitivity.
Motion Interval:
Set this value to define the interval of motion detection. If set longer value,
means system will use less CPU computing power to check motion detection.
Display Motion detection status:
Checked the check box to
display the area(s) where motion
detection is triggered.
Preview window:
Red area is the motion
detection area. The other areas are
non-motion detection region.
The yellow rectangles are
triggered regions of motion
detection areas.
2.6.13 DI Record Setting
When you set the DI record mode, select the DI input from
the combo box, and select the DI as open or close to trigger
recording.