AirLive G.DUO - Manual (Page 10)

1. Introduction
3 A irLive G.DUO User’s Manual
1.4.2 Client + AP mode
In this mode, Radio1 is working as a wireless client to connect with remote AP. Radio2 is
working as an Access Point to redistribute the signal from Radio1. This combination
creates a wireless repeater with 2 radios. It can be used to amplify the signal from remote
AP.
1.4.3 Dual AP Mode
In this mode, the G.DUO works as 2 Access Points. You can have both radios with
directional antennas to create a larger coverage. Please remember to set the channels of
the radios as far apart as possible.
1.4.4 Gateway + AP
In this mode, both Radios are acting as wireless router. The WAN port is the LAN1 port.
The application for this is to extend the wireless router’s coverage. You can use 2
directional antennas to provide longer distance and wider coverage over large area, such
as in the shopping center. When using this mode, it is recommended to use directional
antennas for both radios to avoid mutual interference.