AirLive G.DUO - Manual (Page 12)

2. Install the G.DUO
5 AirLive G.DUO User’s Manual
2
2.
Installing the G.DUO
This section describes the hardware features and the hardware installation procedure for
the G.DUO. For software configuration, please go to chapter 3 for more details.
2.1 Before You Start
It is important to read through this section before you install the G.DUO
„ It is recommended that you set the channels of the 2 radios as apart as possible
to avoid mutual interference. For example, Radio1 at channel 1 and Radio2 at
Channel 11
„ It is recommended that you adjust the antenna angles to get the best
performance. You can try to move the antenna outward as indicated on the
diagram below if you encounter poor performance problem.
„ The LAN1 port also work as the passive POE port and the WAN port(Gateway
mode only)
„ The passive PoE DC Injector is optional, it is not included with the package.
Please use a 12V passive POE system with G.DUO’s passive POE port. Do not
use 802.3af 48V system or PoE switch with the device.
2.2 Package Content
The G.DUO package contains the following items:
„
One G.DUO main unit
„
One 12V 1A DC power adapter
„
2 x Antennas (subject to change without notice)
„
User’s Guide CD