AirLive RS-1200 - Manual (Page 135)

135
STEP 9﹒ Enter the following setting in Tunnel of VPN function: (Figure11-13)
„
Enter a specific Tunnel Name.
„
From Source: Select LAN
„
From Source Subnet / Mask: Enter 192.168.10.0 / 255.255.255.0.
„
To Destination: Select To Destination Subnet / Mask.
„
To Destination Subnet / Mask: Enter 192.168.20.0 / 255.255.255.0.
„
IPSec / PPTP Setting: Select VPN_A.
„
Select Show remote Network Neighborhood.
„
Click OK. (Figure11-14)
Figure11-13 New Entry Tunnel Setting
Figure11-14 Complete New Entry Tunnel Setting