AirLive RS-1200 - Manual (Page 182)

182
‹ 【ICMP Flood Threshold(Per Source IP)Pkts/Sec】:
The System
Administrator can enter the maximum number of ICMP packets per second
from attacking source IP Address that is allow to enter the network / RS-1200.
If the value exceeds the setting one, and then the device will determine it as
an attack.
‹ 【ICMP Flood Threshold Blocking Time(Per Source
IP)Seconds】: When the RS-1200 determines as being attacked, it will block
the attacking source IP address in the blocking time you set. After blocking for
certain seconds, the device will start to calculate the max number of ICMP
packets from attacking source IP Address. And if the max number still exceed
the define value, it will block the attacking IP Address continuously.
Detect UDP Attack:
„
When Hackers continuously send PING packets to all the machines of the LAN
networks or to the RS-1200 via broadcasting, your network is experiencing an UDP
attack .
‹ 【UDP Flood Threshold(Total)Pkts/Sec】:
The System Administrator
can enter the maximum number of UDP packets per second that is allow to
enter the network/RS-1200. If the value exceeds the setting one, and then the
device will determine it as an attack .
‹ 【UDP Flood Threshold(Per Source IP)Pkts/Sec】:
The System
Administrator can enter the maximum number of UDP packets per second
from attacking source IP Address that is allow to enter the network/RS-1200. If
the value exceeds the setting one, and then the device will determine it as an
attack .
‹ 【UDP Flood Threshold Blocking Time ( Per Source IP) Seconds】:
When RS-1200 determines as being attacked, it will block the attacking
source IP in the blocking time you set. After blocking for certain seconds, the
device will start to calculate the max number of UPD packets from attacking
source IP. If the max number still exceed the define value, it will block the
attacking IP Address continuously.