AirLive RS-1200 User Manual
Page 43
Advertising
43
STEP 2﹒Setting the Connection Service (ICMP or DNS way):
ICMP:
Enter an Alive Indicator Site IP (can select from Assist)
(Figure3-3)
DNS:
Enter DNS Server IP Address and Domain Name (can select
from Assist) (Figure3-4)
Setting time of seconds between sending alive packet.
Figure3-3 ICMP Connection
Figure 3-4 DNS Service
Connection test is used for RS-1200 to detect if the WAN can connect or not. So
the
Alive Indicator Site IP, DNS Server IP Address, or Domain Name must be able to
use permanently. Or it will cause judgmental mistakes of the device.
Advertising