AirLive SNMP-24MGB - Manual (Page 30)

4. Web Management in SNMP-24MGB
23
AirLive SNMP-24MGB User’s Manual
Parameter description:
Current Time:
Show the current time of the system.
Manual:
This is the function to adjust the time manually. Filling the valid figures in the fields
of Year, Month, Day, Hour, Minute and Second respectively and press <Apply>
button, time is adjusted. The valid figures for the parameter Year, Month, Day,
Hour, Minute and Second are >=2000, 1-12, 1-31, 0-23, 0-59 and 0-59
respectively. Input the wrong figure and press <Apply> button, the device will
reject the time adjustment request. There is no time zone setting in Manual mode.
Default: Year = 2000; Month = 1; Day = 1; Hour = 0, Minute = 0; Second = 0
NTP:
NTP is Network Time Protocol and is used to sync the network time based
Greenwich Mean Time (GMT). If use the NTP mode and select a built-in NTP time
server or manually specify an user-defined NTP server as well as Time Zone, the
switch will sync the time in a short after pressing <Apply> button. Though it
synchronizes the time automatically, NTP does not update the time periodically
without user’s processing.
Time Zone is an offset time off GMT. You have to select the time zone first and
then perform time sync via NTP because the switch will combine this time zone
offset and updated NTP time to come out the local time, otherwise, you will not
able to get the correct time. The switch supports configurable time zone from –12
to +13 step 1 hour.
Default Time zone: +8 Hrs
.
Daylight Saving: