AirLive SNMP-24MGB - Manual (Page 72)

4. Web Management in SNMP-24MGB
65
AirLive SNMP-24MGB User’s Manual
Parameter description:
VID:
VLAN identifier. When GVRP group creates, each dynamic VLAN group owns its
VID. Valid range is 1 ~ 4094.
Member Port:
Those are the members belonging to the same dynamic VLAN group.
Edit Administrative Control:
When you create GVRP group, you can use Administrative Control function to
change Applicant Mode and Registrar Mode of GVRP group member.
4.7 QoS
The switch support four QoS queues per port with strict or weighted fair queuing scheduling.
There are 24 QoS Control Lists (QCL) for advance programmable QoS classification,
based on IEEE 802.1p, Ethertype, VID, IPv4/IPv6 DSCP and UDP/TCP ports and ranges.
High flexibility in the classification of incoming frames to a QoS class. The QoS
classification looks for information up to Layer 4, including IPv4 and IPv6 DSCP, IPv4
TCP/UDP port numbers, and user priority of tagged frames. This QoS classification
mechanism is implemented in a QoS control list (QCL). The QoS class assigned to a frame
is used throughout the device for providing queuing, scheduling, and congestion control
guarantees to the frame according to what was configured for that specific QoS class.
The switch support advanced memory control mechanisms providing excellent
performance of all QoS classes under any traffic scenario, including jumbo frame. A super
priority queue with dedicated memory and strict highest priority in the arbitration. The
ingress super priority queue allows traffic recognized as CPU traffic to be received and
queued for transmission to the CPU even when all the QoS class queues are congested.
4.7.1 Port QoS Configuration