AirLive SNMP-FSH2602MG v2 - Manual (Page 105)

5. Console Management in SNMP-FSH2602MG v2
AirLive SNMP-FSH2602MG v2 User’s Manual 100
„ Misc Configuration
1. Select
<Edit>
2. Quiet Period: set the period during which the port doesn’t try to acquire a supplicant.
3. TX Period: set the period the port wait for retransmit next EAPOL PDU during an
authentication session.
4. Supplicant Timeout: set the period of time the switch waits for a supplicant response
to an EAP request.
5. Server Timeout: set the period of time the switch waits for a server response to an
authentication request.
6. Reauthorize Maximum: set the number of authentication that must time-out before
authentication fails and the authentication session ends.
7. Reauthorize period: set the period of time after which clients connected must be
re-authenticated.
8. Select <Save>
5.4.4 System Reset Configuration
You can reset the system back to default value, reboot the system and update the system
firmware.