AirLive SNMP-FSH2602MG v2 - Manual (Page 17)

3. Configuring the SNMP-FSH2602MG v2
AirLive SNMP-FSH2602MG v2 User’s Manual 12
After finishing the parameter settings, click “OK“. When the blank screen shows up,
press Enter key to bring out the login prompt. Key in the “airlive“(default value) for the
both User name and Password (use Enter key to switch), then press Enter key and the
Main Menu of console management appears. Please see below figure for login screen.
„ Telnet Management (Terminal): SNMP-FSH2602MG v2 can be managed through
telnet. To use the telnet, please open the command line windows. Then type “telnet
Baud Rate: 9600 bps
Data Bits: 8
Parity: none
Stop Bit: 1
Flow control: None