2 switch setting – AirLive SNMP-FSH2602MG v2 User Manual
Page 25
Advertising
4. Web Management in SNMP-FSH2602MG v2
AirLive SNMP-FSH2602MG v2 User’s Manual
20
After changing the IP address, you must reboot SNMP-FSH2602MG v2.
DHCP Client: Disable or enable the DHCP client function. Once enabling “DHCP
Client” function, SNMP-FSH2602MG v2 will get IP address by DHCP server.
IP Address: Assign the switch IP address. The default IP is 192.168.10.1.
Subnet Mask: Assign the switch IP subnet mask. The default IP is 255.255.255.0
Gateway: Assign the switch gateway. The default Gateway IP is 192.168.10.254.
4.4.2 Switch Setting
In this page, it has three parts of setting: Basic, Advance, and Misc Config. We will
describe the configure detail in following.
Advertising