AirLive WL-1000CAM - Manual (Page 64)

AirLive WL-1000CAM User’s Manual
63
System
Camera Name The default camera name is
―IC1500‖. It is recommended to
name a meaningful name for the camera.
Login Name Setup your administrator account ’s login name. Default name is
―admin‖
PASSWORD
Enter up to 4 digits password for the new user account.
CONFIRM PASSWORD
Enter the password again to confirm the setting.
Set Date/Time manually Display the current Date and Time.
NTP Server Synchronize the Date and Time with this NTP server.
Time Zone Select the time zone that your camera put on.
NTP Server Specify the IP Address of the NTP Server.
Upgrade Firmware You can upgrade camera’s firmware via this function. Press the
browse button, find the correct firmware and press upgrade.
Reset to Factory Defaults If you want to reset all the camera settings to default, click this
button.
Reboot Device To reboot the Internet Camera, click ―Reboot‖.
LED Setting There are four LEDs to indicate the status of Internet Camera. If
you wan to secure the camera from noticing, you can turn off the
LED
light by clicking ―LED Light OFF‖. To turn on the LED light,
click ―LED Light ON‖.