AirLive WL-1000CAM - Manual (Page 9)

AirLive WL-1000CAM User’s Manual
8
2-2 Camera Ports
The Camera features three ports and a Reset button.
y Power
The Power port is where you can connect the power adapter.
y LAN
The LAN port is where you can connect the Ethernet network cable.
y WLAN (Antenna Connector)
This round connection is standard Reverse SMA connector where any antennas with Reverse
SMA connector can connect to the Internet Camera..
y Reset
1. If problems occur with your Internet Camera, press the reset button with a pencil tip
(for less than 2 seconds) and the Internet Camera will re-boot itself, keeping your
original configurations.
2. If problems persist or you experience extreme problems or you forgot your
password, press the reset button for longer than 5 seconds and the Internet
Camera will reset itself to the factory default settings (warning: your original
configurations will be replaced with the factory default settings).
改圖
Reset Button
LAN Port
Power Jack