AirLive WN-250R - Manual (Page 41)

2. System and Network Setup
AirLive WN-250R User’s Manual 32
2-3-5 Setup procedure for ‘L2TP xDSL’:
L2TP is another popular connection method for xDSL and other Internet connection types,
and all required setting items are the same with PPTP connection.
Like PPTP, there are two kinds of required setting, we’ll start from ‘WAN Interface Settings’:
Please select the type of how you obtain IP address from your service provider here. You
can choose ‘Obtain an IP address automatically’ (equal to DHCP, please refer to ‘Cable
Modem’ section above), or ‘Use the following IP address’ (equal to static IP address, please
refer to ‘PPPoE xDSL’ section above).
WAN interface settings must be correctly set, or the Internet connection will fail even those
settings of PPTP settings are correct. Please contact your Internet service provider if you
don’t know what you should fill in these fields.
Now please go to L2TP settings section: