AirLive WN-250R - Manual (Page 58)

2. System and Network Setup
49 AirLive WN-250R User’s Manual
Service Name (3): Please give a name to this Internet service, this is optional
MTU (4): Please input the MTU value of your network connection here. If you
don’t know, you can use default value.
Connection Please select the connection type of Internet
Type (5): connection you wish to use.
Continuous – The connection will be kept always on. If the
connection is interrupted, the router will re-connect
automatically.
Connect On-Demand – Only connect when you want to
surf the Internet. “Idle Time Out” is set to stop the
connection when the network traffic is not sending or
receiving after an idle time.
Manual – After you have selected this option, you will see
the “Connect” button and “Disconnect” button, click
“’Connect” and the router will connect to the ISP. If you
want to stop the connection, please click “Disconnect”
button.
Idle Time Out (6): If you have selected the connection type to “Connect-On-Demand”,
please input the idle time out.
After you finish with all settings, please click ‘Apply’ (7) button and the following message
will be displayed on your web browser: