Bissell Proheat2x 9500-p - Manual (Page 7)

w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
7
O
perations
Custom Clean
®
the custom clean feature automatically mixes hot
tap water with the bissell formula. simply choose
one of the 4 settings (heavy traffic, normal clean,
light clean, or water rinse) and the ProHeat 2X
cleanshot Professional will adjust the right amount
of cleaning solution to mix with the heated water
to fit your cleaning need.
CleanShot
®
the cleanshot feature gives you the ability to tack-
le tough stains with the push of a button. cleaning
solution is sprayed in a concentrated stream, pen-
etrating the stain and allowing for better cleaning
focus. simply spray and suction and the stain is
gone! cleanshot is especially effective for spots
and stains that would otherwise take a lot of deep
cleaning cycles to remove. it allows the cleaning
formula and machine to do the work for you.
Dry Aire™
the dry aire system applies heated air directly to
the carpet to help dry as you clean. the feature
runs while your machine is powered.
Flow indicator
the flow indicator is located on the rear cover
of your unit. When the unit runs out of water
or solution the flow indicator will instantly let
you know.
2-in-1 water tank
our 2-in-1 water tank full capacity system is
designed with a heavy duty bladder inside for
clean water. as you clean, the clean water in the
bladder will empty and mix with the cleaning
formula. dirty water pulled out of your carpets will
collect around the outside of the bladder so that
clean and dirty water are always kept separate.
this allows the user to only carry one tank to and
from the sink for emptying and filling.
Flow Indicator
(located on upper handle)
CleanShot ®
Dry Aire™