Beko DVD 2008 - Manual (Page 12)

10
(1)If the TV has component video input (YcbCr/YPbPr) jacks, you can connect them to the
YcbCr/YPbPr jacks of the DVD player to get a clearer picture, and use these jacks rather
than the S-VIDEO OUTPUT jack.
(2)DVD player setup: (Setup the DVD player according to the connected TV.)
If the TV system is PAL, select PAL output.
If the TV system is NTSC, select NTSC output.
Connect the DVD player to the wide screen TV,
set the “TV TYPE” as“16:9 ” in FUNCTION SETUP.
If the DVD player is connected to an ordinary TV, set the “TV TYPE” to “4：3 PS”
or “4：3 LB” in FUNCTION SETUP.
Connecting to a TV Connect the DVD player to a TV.
Connecting to an Interlaced Scanning TV
COMPONENT VIDEO OUTPUT
AUDIO OUTPUT (R)
AUDIO OUTPUT (L)
COMPOSITE VIDEO OUTPUT
S-VIDEO OUTPUT
TV
Notes:
MODEL:SH318H