Beko DVD 2008 - Manual (Page 17)

15
Basic Playback
Preparations
If you want to play a DVD, VCD or CD-DA disc, turn on the TV and select the video input source which is
connected to the DVD player.
If you want to enjoy the sound of disc from the audio system, turn on the audio system and select the input
source which is connected to the DVD player.
For connection details, see ‘Connections’.
1.Turn on the DVD player
Press the POWER button on the front panel,
And then press the PLAY button to wakeup
the DVD.
When the Player is not used for a long
period,please pull off the power plug.
2.Open the tray
Press the OPEN/CLOSE button to open the
disc tray.
3.Place the disc
When the disc tray is open, place the disc on
the disc tray, with the playback side down..
Notes:
There are two different disc sizes.Place the disc in
the correct guide on the disc tray.If the disc is out of
the guide,It may damage the disc and cause the DVD
player to malfunction.
Do not place anything except the DVD,VCD,CD and
MP3 discs on the disc tray.
4.Play
Press the PLAY button, the disc tray closes
and playback starts.
When playing a DVD disc with the title menu
recorded or VIDEO CD with the playback
control (PBC),a menu screen will appear.
Notes:
For the playback control(PBC)of the VCD2.0 and
SVCD, please refer to PBC Playback.
When not using the menu screen(with PBC) of the
VCD2.0 or SVCD, you can press the PBC button to
turn off the “PBC”.
Notes
Do not move the DVD player during playback.Doing so may damage the disc.
Use the OPEN/CLOSE button on the remote control or DVD player to open or close the disc
tray. Do not push or touch the disc tray while moving. Doing so may cause the DVD player
to malfunction.
Do not push up on the disc tray or put any objects other than discs on the disc tray.Doing so may
cause the DVD player to malfunction.