Blade ICE BLADEOS BMD00178 User Manual
Page 11
BLADEOS 6.3 Application Guide
BMD00178, April 2010
11
3.
Boot the switch and access the Boot Management menu by pressing <Shift B> while the Memory
Test is in progress and the dots are being displayed.
4.
Select 3 for Xmodem download. When you see the following message, change the Serial Port
characteristics to 115200 bps:
5.
Press <Enter> to set the system into download accept mode. When the readiness meter displays (a
series of “C” characters), start XModem on your terminal emulator.
6.
Select the Boot Image to download. The XModem initiates the file transfer. When the download is
complete, a message similar to the following is displayed:
## Switch baudrate to 115200 bps and press ENTER ...
yzModem - CRC mode, 62494(SOH)/0(STX)/0(CAN) packets, 6 retries
Extracting images ... Do *NOT* power cycle the switch.
**** VMLINUX ****
Un-Protected 10 sectors
Erasing Flash............. done
Writing to Flash.............done
Protected 10 sectors
**** RAMDISK ****
Un-Protected 44 sectors
Erasing Flash............................................... done
Writing to Flash...............................................done
Protected 44 sectors
**** BOOT CODE ****
Un-Protected 8 sectors
Erasing Flash........... done
Writing to Flash...........done
Protected 8 sectors