Blade ICE BLADEOS BMD00178 - Manual (Page 25)

BLADEOS 6.3 Application Guide
BMD00178, April 2010 25
Command Replacements
STP Edge and Link
The following commands have been moved in the CLI:
The equivalent ISCLI config-if mode commands (under interface port <#>) have also been
moved:
When the switch boots with BLADEOS 6.3 software, any prior configuration in the active
configuration block will automatically be updated to use the new command paths.
Old CLI Path New Path
/cfg/l2/stg <#> /port <#> /edge /cfg/port <#> /stp/edge
/cfg/l2/stg <#> /port <#> /link /cfg/port <#> /stp/link
/cfg/l2/mrst/cist/port <#> /edge /cfg/port <#> /stp/edge
/cfg/l2/mrst/cist/port <#> /link /cfg/port <#> /stp/link
Old ISCLI Path New Path
spanning-tree stp <#> edge spanning-tree edge
spanning-tree stp <#> link spanning-tree link-type
spanning-tree mstp cist edge spanning-tree edge
spanning-tree mstp cist link-type spanning-tree link-type