Bpdu guard – Blade ICE BLADEOS BMD00178 User Manual
Page 26
BLADEOS 6.3 Application Guide
26
BMD00178, April 2010
BPDU Guard
BLADEOS 6.3, BPDU Guard is now configured on a per-port basis, rather than globally. The
following commands have been moved in the CLI:
The equivalent ISCLI Global Configuration Mode command has moved to the Interface Port
Configuration Mode:
During upgrade to BLADEOS 6.3, any current BPDU Guard configuration will be automatically
converted. If the prior global BPDU setting was enabled, that setting will be removed, and BPDU
Guard will be applied to all ports where the port fast-forward feature is enabled. This conversion
will also be applied when loading configuration scripts from previous releases.
Note –
If you want to apply BPDU Guard to different ports than configured with port fast-forward,
after any conversion, review the interface port configuration and make any appropriate changes
manually.
Old CLI Path
New Path
/cfg/l2/bpduguard
{
ena|dis
}
/cfg/port
<#>
/bpduguard
{
ena|dis
}
Old ISCLI Path
New Path
(config)# spanning-tree bpdu-guard
(config)# interface port
<x>
(config-if)# bpdu-guard