Audio signal paths, Gr2 user guide, Page mix – Allen&Heath GR2 PL-12 USER GUIDE 1 User Manual

Page 8: Mic mix, Music mix, Zone 1 and 2 vca mixes, Aux mix

Advertising
background image

8

GR2 User Guide

Audio Signal Paths

Simplified block diagram

Page mix

- Overrides the music/mic selection. The input is from the external

page input and/or from mic 1 if it is configured as a paging mic. The page mix
EQ provides high pass and low pass filters tuned for paging speech. The mix
routes directly to the zone outputs and is not affected by the output level front
panel or remote controls. Signal detected on the page mix causes ducking of

any page enabled zone.

Mic mix

- The performance or conference mic mix. Depending on the

configuration, the mic mix may comprise 3, 4, 5 or 6 mic inputs being sourced
from mics 1-6, 2-6, 1-4 or 2-4. The mix of mic inputs can be routed to the zones
via the VCAs, or direct to the aux output. A dedicated mic EQ provides a swept

frequency high pass filter, swept frequency peak/dip mid, and shelving high
frequency cut/boost tuned to deal with typical live performance or conference
microphone mixing.

Music mix

- An independent mix of the music sources for each zone. Each

has operator controllable music source selection. The number of sources that

can be selected by the operator depends on the configuration, either 2, 3 or 4.
Alternatively, all sources can be permanently mixed together. Music 1 input can
have priority over the other sources for applications such as jukebox or live /
pre-recorded retail announcements. Mics 5/6 can be configured as an
additional ‘music 4’ balanced stereo source. This allows either 6 mic / 3 stereo
music or 4 mic / 4 stereo music capability.

Zone 1 and 2 VCA mixes

- The music plus mic mix for each zone. Zone 1

is stereo, zone 2 is mono. Routed through a VCA, the mix is overridden during
paging or when the alarm input is triggered. The mic mix can be added to the
pre-VCA music mix. Zone 1 has a 2-band EQ and mono switching.

Aux mix

- An independent mono output which can be sourced from any

combination of the page mix, mic mix, post-level zone 1 or zone 2 mix.
Applications include routing the page mix only to create a single paging source
to daisy chain through other GR2 units, routing mic mix only to expand the
number of mics to a second GR2, feeding a conference recorder, or creating a
mono sum and filtered sub bass mix to compliment the zone 1 stereo output.

MIC1

EXPAND

PAGE EQ

PAGE MIX

EXT PAGE IN

MIC MIX

MIC EQ

MUSIC1

MUSIC2

MUSIC3

< SELECT >

1
2
3
4

1
2
3
4

LEVEL

MICS

MICS

ZONE1 EQ

SOURCE

PAGE MIX
MIC MIX

ZONE1
ZONE2

LEVEL

PAGE

PAGE

SUB EQ

AUX

ZONE2

AUX

MIC2

MIC3

MIC4

MIC5

MIC6

MIC MIX

ZONE1 MIX

ZONE2 MIX

SOURCE

ZONE2

AUX

ZONE1

ZONE1

STEREO

MONO

MIC5/6, MUSIC4

PAGE MIC

MUSIC PRIORITY

MIC PRIORITY

DUCKING

UTILITY REMOTE

Z1 PAGE ENABLE

ZONE REMOTE

MIC MUTE

MIC PRIORITY

ALARM OVERRIDE

Z1 SOURCE SELECT

Z1 LEVEL

Z2 SOURCE SELECT

Z2 LEVEL

Z2 PAGE ENABLE

PHANTOM POWER

MUSIC MUTE

MIC MUTE

MONO / STEREO

GR2 AUDIO ZONE MIXER

MUSIC

10V LOGIC

< SELECT >

GAIN / PAD

LINE +4/-10

L

R

L

R

L

R

L

R

PL-12 WALL PLATE

5

4

3

2

1

PL-5

5

4

3

2

1

6

7

8

9

12

13

10

11

14

PL-5 IR CONTROLLER

REMOTE CONTROL

Advertising
This manual is related to the following products:

GR2