Anchor PERFECTSHADE User Manual
Page 2
Warning: The Perfect Shade Structure is intended for concrete Install only. Installer is solely re-
sponsible for evaluating the quality of the concrete and its suitability for this structure.
Concrete installation surface must be level.
Manpower Required:
Three experienced installers should be able to assemble any size frame with fabric in two hours.
Caution:
Please read through this assembly manual completely before beginning your installation. Be sure the proper
equipment and safety precautions are in place. We hope that you enjoy the design features of the Perfect Shade
Structure.
1. Be aware to avoid contact of frame sections with any overhead power lines near the site.
2. Consult the local utility company prior to installation in order to avoid all underground power lines and gas
lines or other utility easements.
3. Keep site clear of debris to avoid tripping, especially while carrying frame parts or bundle of fabric.
4. When moving frame sections by hand, use proper lifting techniques to protect the back, and avoid pinching
fi ngers while making hardware connections.
5. Do not drag bundle of fabric on concrete, asphalt, or ground as this can cause damage to the fabric from abra-
sion through the bag.
6. The installation method described here requires coordination of tasks between workers. A safe installation is
dependent on that coordination. Work cooperatively as a team.
7. This tent is manufactured for use as a temporary sun shade structure. Evacuation is recommended if threaten-
ing or windy weather occurs.
Parts List
Part Name
Qty. for (1)
Frame
Upright with Base Plate
4
Hip Weldment
4
Peak Weldment
2
Ridge Tube
1
Hex Head Cap Screw 1/2 x 3 1/4”
4
1/2” Nylock Nut
4
Fabric top in bag with wire rope & clamps
1
Installation Kit (purchased separately)
1
Hip Weldment
Ridge Tube
Fabric top Bag
with wire rope & clamps
attached to top.
Upright with
Baseplate
Peak Weldment
1/2” Nylock
Nut
1/2” Hex
Head Cap
Screw
Installation Kit
Come-a-long (2)
Pull Rope (2)
Eyebolt (2)
Neoprene
Washer (4)
Wing nut
(2)
(4) Wire Rope
Clamps
(spares)
2