Argos Nova Microcinerator User Manual

Page 5

Advertising
background image

5


WARRANTY INFORMATION


The Nova™ Microcinerator is guaranteed free from defects in workmanship and materials
for a period of one year after the customer receives the product. This DOES NOT include
the Sterilizing Element, which is guaranteed for six months. In order to qualify for
warranty repair, the customer must return the warranty card supplied with the unit that
includes all of the information required to validate proof of purchase.

Should warranty service be required, repair or replacement will be provided by Argos
without charge. Freight expense shipping the unit to Argos will be the responsibility of the
purchaser. There are no other warranties or guarantees, implied or otherwise expressed,
including any warranties of application or merchantability.

Damage caused from improper use or maintenance will not be covered by this warranty
agreement. In such cases the warranty will be considered null and void.


Getting Started

Please check the voltage of your unit before unpacking.

1.

Remove all protective packaging from your Nova™ Microcinerator. Note - the cork
bung protecting the element MUST be removed before switching on the unit.

2.

Check to ensure the Sterilizing Element is free from debris.

3.

Attach the power cord supplied into the rear of the base unit. Plug the opposite end of
the cord in to a suitable power outlet.
NOTE: Use of a 2-pronged adapter IS NOT recommended.

4.

Adjust the burner unit to a comfortable position (see page 7). Always allow your
Nova™ Microcinerator to cool for one hour before adjusting the burner head or
moving to a new location.

5.

Flip the rocker switch to “on” to activate the unit. Note, the switch should illuminate
red.

6.

The Nova™ Microcinerator will reach 816C/1500F degrees within 10 minutes after the
unit is switched on. The Nova™ Microcinerator can be left on for extended periods of
time.

ATTENTION: DO NOT touch any part of the heating guard or end caps when
the Nova™ Microcinerator is in the “on” position or for one hour after being
turned off!

Advertising