Argos Nova Microcinerator - Manual (Page 7)

7
Sterilizing Loops and Needles
1. Carefully insert the loop or needle at least halfway into the sterilizing element to avoid
aerosoling any residual contaminants. Take care not to scrape the element walls as
this may reduce the efficiency of the heating unit.
2. The loop or needle will be sterilized in 5 to 7 seconds. Heating your loop or needle
until it glows is not necessary.
3. Loops when not in use can be placed in the loop storage holes located in the legs of
the base unit.
© Argos technologies Inc 2005